Safecoat Naturals Oil Wax Finish

Safecoat Naturals Oil Wax Finish

 

DESCRIPTION: Safecoat Naturals Oil Wax Finish is an organic plant-based
premium hardener and sealer for unfinished woods. It is an ideal choice for
all ready to finish wood and bamboo floors and other interior wooden
surfaces including furniture. It contains a sophisticated combination of
natural resins and waxes that together create a durable, water repellent,
water-mark resistant finish and sealer, enhancing and maintaining wood
beauty and breathability.
PRODUCT NUMBER AND CONTAINER SIZE:
40216 (quart), 40116 (gallon) and 40316 (five gallon).
INGREDIENTS: Based on natural vegetable oils, waxes, and plant
extractives, this product is free of lead, cobalt and citrus drying compounds.
Ingredients: Polymerized Linseed Oil, Organic Safflower Oil, China Wood
Oil, Sunflower Oil, Carnauba Wax, Microcrystalline Wax, Modified Soybean
Oil, Hemp Oil, Isoaliphate, Carboxylate Metallic Salts of Calcium Mangenese
& Zirconium. Contains no biocides or harmful preservatives.
BEFORE USE: AFM Naturals Oil Wax Finish can be used on most unsealed
wood, new or weathered. Surfaces must be cleaned of any grease, oils,
dust, dirt, wax, prior coatings, adhesives and other foreign materials. Surface
must be completely dry and stable before application. Moisture content of
the wood must be below 12%.
PREPARATION FOR NEW WOOD: Sand wood smooth with 150 grit
sandpaper to open wood grain. Rinse surface with water-dampened rags to
remove sanding dust. Dust and dirt must also be removed from cracks or
other floor irregularities. Surfaces in good condition may only need a light
sanding and cleaning to prepare for application of Safecoat Naturals Oil Wax
Finish.
OLD UNFINISHED WOOD: Patch where necessary, and sand old wood
surfaces with 150 grit sandpaper. Before applying oil finish, make sure
surface is perfectly clean and free of dust, dirt and other foreign materials.
OLD PREVIOUSLY STAINED WOOD: Completely remove all old finish.
Failure to remove the existing finish will result in a blotchy application due to
uneven penetration and discoloration of aged finish. Adhere to ALL
precautions and safety requirements when using strippers and finish
removing equipment.
WHEN STAINING NEW WOOD PRIOR TO APPLICATION OF THIS
PRODUCT, ALWAYS TEST FOR NATURALS OIL WAX FINISH AND STAIN
COMPATIBILITY.
APPLICATION: Every species of wood, and every piece of wood within a
species, is unique and will react differently to a natural product. For
example, soft or porous woods such as pine, alder, birch, fir, cedar and
redwood may absorb oil unevenly; some woods may contain tannins and
other extractives that will bleed through to the surface and affect appearance.
Accordingly, ALWAYS conduct several test patches or a test coat to ensure
compatibility and acceptability of appearance before application to the entire
surface. Although Safecoat Naturals Oil Wax Finish contains no
formaldehyde or other toxic ingredients and requires no special protective
equipment to apply, assure good ventilation throughout use and while
product is drying. Protect adjacent surfaces not to be coated, including
plants. Stir product thoroughly prior to use and occasionally during use. Do
not thin. The temperature of the room, oil, floor and other surfaces to be
coated should be 70-80 degrees F to assure good flow and proper curing.
Unload material from brush by brushing material across the grain of the
surface. Work material deeply into the surface. Final brush strokes should
smooth material out in the direction of the grain and should blend back into
wet areas. Allow 15-20 minutes of penetrating time and then apply a second
coat, allowing an additional 15-20 minutes of penetrating time before
removing excess oil*. Do not allow to puddle. Safecoat Naturals Oil Wax
Finish may be sprayed using an airless sprayer with 0.11 tip or larger. Do not
use Safecoat Naturals Oil Wax Finish on small enclosed spaces such as
desk or dresser drawers unless they can be exposed to good ventilation. If
desired and wood is still absorptive, another coat may be applied after 24
hours. Note: these instructions are intended to be general only and not
exhaustive. The applicator should determine what preparation and
techniques are best suited to the specific surface.

 

COVERAGE: Coverage will vary depending upon the type, age, and porosity
of the wood and on the number of coats applied. Test patches will provide a
good indication of likely coverage. In general, when applied in wet-on-wet
coats to weathered wood, one gallon will cover from 125 square feet to 250
square feet; on new, relatively non- porous wood, from 250 - 450+ square
feet.
CLEAN-UP: Clean tools and equipment while they are still wet with AFM
Naturals Diluent/Reducer or grain alcohol. Have good ventilation during
clean-up*.
DRYING/CURING: Drying conditions will vary greatly depending on
application techniques and weather conditions. Allow 24 hours to dry before
use. Typically cures to full hardness in 3 weeks. Dried surface can be
buffed by hand or machine.
STORAGE: Safecoat Naturals Oil Wax Finish contains no preservatives,
mildewcides or fungicides. Pour out only what will be used. Do not cross
contaminate contents by pouring back material that has been in contact with
contaminants. Keep container closed when not in use. In case of spillage,
absorb with inert material such as sand or cat litter. Dispose of such material
and/or unused contents in accordance with local, state and federal
regulations. Unused contents should be kept in a closed container in a cool,
dry place out of direct sunlight.
LIMITATIONS: Do not apply to substrate in direct sun or where hot to the
touch as this will cause excessively fast curing and prevent
adhesion/absorption. Sample test a small area to assure proper
adhesion/absorption can be obtained. Do not freeze. Safecoat Naturals
contain no biocides or harmful preservatives. Do not contaminate. Additional
products or precautions may be necessary if protection of surface from mold,
mildew or fungus growth is desired.
HEALTH PRECAUTIONS: Keep container tightly closed and out of the
reach of children. Do not take internally. If swallowed, do not induce
vomiting. Call a physician immediately. If splashed on skin or eyes,
flush with plenty of water for 15 minutes. If you are chemically
sensitive: Safecoat Naturals are lower in odor than other oil based
products, natural or synthetic, but they do have a mild, characteristic
vegetable oil odor. Always test for personal tolerance before using.
LIMITED LIABILITY: Safecoat® products are guaranteed not to be
defective when properly applied. Liability express or implied is limited to
replacement of product or refund of purchase price and does not include
liability for labor costs or consequential damages. Variable factors out of
manufacturer’s control, such as environmental conditions, application
techniques, and surface conditions are critical to results obtained. Users
are expected to exercise reasonable care to determine suitability of the
product for each application. This limited warranty may not be modified
or extended by manufacturer’s representatives, distributors or dealers of
Safecoat® products. We strongly recommend that users always test
in small, inconspicuous areas before application to the entire
surface.
*WARNING: Spontaneous combustion danger! This product contains
vegetable oils. By itself, it is not flammable or subject to spontaneous
combustion. However, rags, steel wool, sanding dust or waste soaked with
oil may spontaneously catch fire if improperly discarded or stored.
Immediately after each use, place rags, steel wool, paper, cardboard,
sanding dust and other soaked waste in a sealed, water filled metal
container to prevent heat build-up and fire. When drying, allow oil soaked
materials to spread out in open air to prevent fire

Dimensions: 0in. × 0in. × 0in.
Weight: 0 lb.

© Bgreentoday      Contact Us: 734-214-3000           Privacy Policy